SUPER GLUE
HIGH TEMP BOND-LOC1232274 >
1-QT 7452 ACCELERATOR (ACETONE)-LOC18575 >
The 18580 is a 1.75fl-oz Cyanoacrylate Adhesive Bottle for cure acceleration, surface priming and transparent amber adhesive. It is in liquid form with acetone odor and soluble in water and it is extremely flammable. It increases cure speed of instant adhesive and has aggressive cleaning properties. Excellent for cosmetic use, for clear and transparent adhesive beads or fillets. Suitable for securing wires or coils to PCBs. On-part life of 1 minute.
1.75-OZ #712" LOCTITE ACCELERATOR-LOC20352 >
50ML E-00NS HYSOL ADHESIVE-LOC29294 >
4" GRAM TUBE OF QUICKTITE SUPER GLUE GEL WITH CLOG-FREE TIP-JWH318388 >
5-GRAM BOTTLE SUPER GLUE--CARDED-JWH341282 >
LOCTITE 2-GM GEL SUPER GLUE-JWH341304>
5GRAM TUBE SUPER GLUE--CARDED BRUSH ON-JWH386847 >
#403 PRISM INSTANT ADHESIVE-LOC40140>
20-GN CLEAR INSTANT ADHESIVE-LOC40945>
3-GR #410 PRISM INSTANT ADHESIVE-LOC41004>
1-OZ 414" SUPERBONDER-LOC41450 >
1-OZ #416 SUPERBONDER ADHESIVE-LOC41650
20-GM #480 PRISM ADHESIVE-LOC48040 >
1-OZ SUPER BONDER 495 ADHESIVE-LOC49550 >
16-GA GREY TAPER TIP KIT--PK/50-LOC97221 >
A 1-part, exceptionally low-viscosity instant adhesive forming an ultra thin adhesive film for smallest adhesive gaps in seconds (fast-fixturing). Suitable for plastics and elastomeric materials.
Loctite Super Bonder 415 clear cyanoacrylate adhesive is compatible with metal, plastic and rubber materials with a 24 hr cure time. Provides a 30 sec fixture time. Delivers great performance with a shear strength of 3600 psi, tensile strength of 1740 to 3625 psi and peel strength of 2.8 pli. Minimum to maximum operating temperatures are -65 F to +180 F. Comes in a 1 oz Bottle. This cyanoacrylate
Loctite 454 clear Surface Insensitive cyanoacrylate adhesive is compatible with fabric, cork and wood materials with a 24 hr cure time. Provides a 5-10 sec fixture time. Delivers great performance with a shear strength of 3200 psi. Minimum to maximum operating temperatures are -65 F to +250 F. Comes in a 3 g Tube. Formerly known as Loctite 454 Prism.
Recently Viewed
Multi-Tap Connector, 2 Port, 1 Side Entry, 14 to 4 AWG, AL/CU
1.78 -OD GREASE CAP (FOR LM-11910)-MATGC2 >
1-1/2" BRASS CAM & GROOVE COUPLER-DXN150ABR >
4-7/16" 4-BOLT PILLOW BLOCK UNIT-REXZP5407YF >
Krylon® Tough Coat® A00340 S003 Rust Control Solvent Based Spray Primer, 16 oz Container, Liquid Form, Gray, 20 sq-ft Coverage
Channellock® 318 E SERIES™ XLT™ High Leverage Long Nose Plier, Cross Hatched/Serrated High Carbon Steel Jaw, 2.96 in L x 45/64 in W Jaw, 8 in OAL, 0.13 in W Tip
The Channellock® E SERIES™ line-up features Xtreme Leverage Technology (XLT™) for considerably less force required to cut than traditional high leverage designs. Crosshatch jaws provide maximum grip and the pipe grip design accommodates many shapes. Laser heat-treated cutting edges last longer and easily cut hard and soft wire. The streamlined design is sleeker and lighter for easier handling.
