HTD Belts
1190-14M-55 Dodge® 146555 HT200 Single Sided High Torque Belt, 85 Teeth, 14 mm Pitch, 1190 mm OAL, 55 mm W, Chloroprene Rubber
Dodge® synchronous belt drives require no lubrication. They provide a positive engagement between a toothed belt and a toothed sprocket and are offered with curvilinear, modified curvilinear and trapezoidal tooth profiles.
3136-14MX-37 Dodge® 142790 HT500 High Torque Belt, 14 mm Pitch, 3136 mm OAL, 37 mm W
3136-14MX-37 Dodge® 142790 HT500 High Torque Belt, 14 mm Pitch, 3136 mm OAL, 37 mm W
800-8MX-21 Dodge® 142648 HT500 High Torque Belt, 8 mm Pitch, 800 mm OAL, 21 mm W
TB Wood's® synchronous Plus synchronous drives offer the added flexibility of a dual sprocket design that features both metric and standard-tapped holes coupled with a high-capacity synchronous Plus belt. As a result, the synchronous Plus drive offers a significantly higher horsepower rating at the standard industry price.
TB Wood's® QT Power Chain® synchronous belt drives are constructed with materials of the highest quality and strength. Extensive development performed by research and development has resulted in the homogeneous integration of all components, the cohesive bond of which imparts superior torque capacity giving QT Power Chain® drives the ability to exceed the performance of existing belt drives and compete with chain and other mechanical systems.
Recently Viewed
14" 50# UV/BLACK CABLE TIES--BAG OF 500-CTE1450UV500 >
12/3-SJT ORANGE ELECTRICAL CORD (BY THE 250' ROLL)-ECI20308 >
A rugged, heavy-duty saw with the versatility to satisfy professional requirements.
Greater weight means a faster job.
Permits efficient one-hand use where necessary.
Blade cuts fully through to a flat surface.
Converts easily from vertical to horizontal position for full-flush cutting.
Durable, tubular steel frame and die-cast zinc handles with blue finish.
Pivot-action front end with slotted tensioning rod permits maximum tightening of blade for more efficient sawing and longer blade life.
Curved front-end design for comfortable two-hand use.
Storage for extra blades in tubular steel frame.
Supplied with blade; Cat. No. 1200BI Golden Tri-Cut blade.
Browning® 1045392 VP Series Type 2 Variable Pitch Sheave, 1-1/8 in Finished Bore, 4.15 in OD, 1 Groove, 2.7 to 3.5 in (3L)/3 to 4 in (A/4L)/3.2 to 4.2 in (B/5L) Dia Pitch, 3/4 to 1-1/8 in W Face
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
The Oatey® All Plastic Snap-In Drain, Waste and Vent Cleanout Assembly prevents sewer gas escapement while allowing for easy access to the drain line for cleaning or repair. Simply turn its threaded cap to remove. It snaps into a cleanout assembly and can be solvent welded inside Schedule 40 pipe. Oatey products have earned the trust of plumbing professionals for over 100 years.
Carlon® E979EFNL Type FSCC Rigid Device Box, PVC, 18 cu-in Capacity, 1 Gangs, 4.54 in L x 2.8 in W x 2.42 in D
Carlon® E979EFNL Type FSCC Rigid Device Box, PVC, 18 cu-in Capacity, 1 Gangs, 4.54 in L x 2.8 in W x 2.42 in D
