BENCH

10" X 3/4" ARBOR WIRE WHEEL BRUSH - WEI01248>

6" X 1/2"-5/8" BENCH GRINDER WHEEL-WEI02325 >

10" WIRE WHEEL BRUSH - WEI03190>

2" X .014" TLM-6 BRASS WIRE WHEELS-WEI06081 >

Light-cleaning brushes have carbon steel crimped-wire bristles to remove dust, flaking paint, oxidation, and other contaminants from carbon steel surfaces. Crimped wire is flexible and conforms to contoured surfaces. Carbon steel bristles remove material at a high rate on iron, carbon steel, and wood. Wheel brushes clean with the edge perpendicular to the workpiece.

3" X .014"-WIRE FILL SMALL DIAMETER WHEEL-WEI15573 >

2-1/2" COARSE WIRE WHEEL BRUSH Shank: 1/4 in (6.35 millimeters) - Wire Size: .014 in (0.356 millimeters) - Material: Steel - Maximum Revolutions per Minute (RPM): 15,000 - Tool Type: For use with any 1/4 in diameter power drill or die grinder

NYLON BRUSHES-OSB20501 >

NYLON BRUSHES-OSB22409 >

6" BENCH GRINDER WIRE BRUSHES-WEI30015 >

3/4" CRIMP END SHANK-MOUNT BRUSHES-WEI30200 >

3" COARSE WIRE WHEEL WITH 1/2" - INSIDE DIAMETER-JWH345399 >

3" WIRE WHEEL & BRUSHES WITH 1/2" - INSIDE DIAMETER-JWH345406 >

4" COARSE WIRE WHEEL-JWH345415 >

6" FINE WIRE WHEEL BRUSH-JWH348392 >

2" FINE WIRE WHEEL-JWH349089 >

6" CRIMPED WIRE WHEEL-WEI35105 >

4" CRIMPED WIRE WHEEL-MWK48521275 >

CRIMPED WIRE BENCH WHEEL BRUSH, 6" X .012" WIRE NARROW FACE WITH 1/2" - 5/8" ARBOR-FOR72750 >

CRIMPED WIRE BENCH WHEEL BRUSH, 6" X .008 WIRE NARROW FACE WITH 1/2" - 5/8" ARBOR-FOR72751 >

CRIMP WHEEL BENCH WHEEL BRUSH, 8" X .012" WIRE WIDE FACE WITH 1/2" -5/8" ARBOR-FOR72762 >

CRIMPED WIRE WHEEL BRUSH, 4" X .012' WIRE WITH 5/8" -11 ARBOR-FOR72788 >

3-3/78" BEVEL WIRE BRUSH-MAK7432030>

• Dense, compact crimped carbon steel wire brush face
• May be stacked to achieve wider work face
• For general scale removal, cleaning and surface preparation
• Standard 2″ arbor, with adaptor to listed arbor
• Includes bushing pairs to adapt to variety of arbors