Coated Abrasive Flap Wheels
ARC™ 11237 Coated Flap Wheel With Shank, 1-1/2 in Dia Wheel, 1 in W Face, 1/4 in Dia Shank, 120 Grit, Fine Grade, Aluminum Oxide Abrasive
Mounted and unmounted flap wheels are a great choice for light grinding, blending, deburring and finishing applications on a variety of metals. Flap wheels conform to many geometries and the radial flap design provides a continuous supply of fresh grain for consistent cutting action. Mounted flap wheels are most commonly used on die grinders.
Recently Viewed
HS-251-5/8X6 CROSBY 5/8"X6" STUB END TURNBUCKLE
Working Load Limit (WLL): 7,200 lbs (3.6 tons) for straight or in-line pulls. Thread / Shank Diameter: 7/8 inch. Take-Up Length: 6 inches. Closed Length: 18 inches. Weight: 4.78 lbs per unit.
Roller chain couplings have a torque capacity in excess of the torque normally transmitted by shafting which falls within the coupling bore range. Select the smallest coupling, which will accommodate both shafts. For a reversing operation, shock or pulsating loads, or other severe operating conditions, select the next larger coupling size. A cover should be used to assure maximum service life, particularly if the coupling operates at high speeds or under moist conditions. For proper lubrication, fill the space between the cover and the coupling with soft to medium consistency coupling grease. Many finished bore sizes available as well as stock bore blanks that can be altered. Chains, covers stocked in all branch locations. All stock roller chain couplings have hardened teeth.
Forged alloy steel, Quenched and Tempered
Features quick and easy assembly
Designed for use with Grade 70 chain
Not intended for overhead lifting
WS-608X24-TUFR Dodge® 038228 WS Ball Bearing Wide Slot Take-Up Frame, 24 in Travel, 35-7/8 in OAL, 12-9/16 in W Base, 16-1/4 in L Bolt Center-to-Center, 10-13/16 in W Bolt Center-to-Center
WS-608X24-TUFR Dodge® 038228 WS Ball Bearing Wide Slot Take-Up Frame, 24 in Travel, 35-7/8 in OAL, 12-9/16 in W Base, 16-1/4 in L Bolt Center-to-Center, 10-13/16 in W Bolt Center-to-Center
Grade 43 high-test chain features both high tensile strength and resistance to wear needed by modern hauling and heavy-duty trucking, farm and construction firms. Working load limits exceed those of ordinary low carbon or general utility chain. Made in USA and comes in a self-colored or zinc finish. Order unit is foot. Not for overhead lifting.
Duracell® DLCR2BPK Cylindrical Battery, Lithium-Manganese Dioxide, 3 VDC Nominal, 750 mAh Nominal, CR2, 3.2 to 3.3 VDC Charge
Duracell® DLCR2BPK Cylindrical Battery, Lithium-Manganese Dioxide, 3 VDC Nominal, 750 mAh Nominal, CR2, 3.2 to 3.3 VDC Charge
