Mandrels & Spindles
ARC™ 50330 Mandrel, 1/4 in Shank, 8 in OAL, For Use With Eyelet
ARC™ 50330 Mandrel, 1/4 in Shank, 8 in OAL, For Use With Eyelet
Dremel® 401 Mandrel, 0.125 in Shank, 1.5 in OAL, For Use With Dremel 414, 422 and 429
Dremel® 401 Mandrel, 0.125 in Shank, 1.5 in OAL, For Use With Dremel 414, 422 and 429
Dremel® 402 Mandrel, 1/8 in Shank, 2-3/4 in OAL, For Use With Dremel® 409, 411, 412, 413, 420, 423, 425, 426, 456, 511, 512, 540 and 541 Polishing Bits, Cut-Off Wheel
Dremel® 402 Mandrel, 1/8 in Shank, 2-3/4 in OAL, For Use With Dremel® 409, 411, 412, 413, 420, 423, 425, 426, 456, 511, 512, 540 and 541 Polishing Bits, Cut-Off Wheel
Dremel® EZ402 Lock Mandrel, 3.2 mm Shank, 11 mm OAL
Dremel® EZ402 Lock Mandrel, 3.2 mm Shank, 11 mm OAL
Weiler® 07766 Drive Mandrel, 4 in OAL, For Use With 2 in, 3 in Dia Bob Cat Mini Flap Disc
Weiler® 07766 Tool Drive Mandrel
Recently Viewed
Apex® 50-TX-15 Screwdriver Bit, T15 Torx® Point, 1-1/2 in OAL
Apex® 950-1X Insert Bit, #1 Square Recess Point, 1 in OAL
2-TON AIR HOIST WITH PENDANT CONTROL, 4000LB LOAD CAPACITY, 10 FT. LIFT, 600-090 PSI, CAST IRON BODY, 6FT. OF CORD, 1/2" MINIMUM AIR HOSE SIZE-HRHTCRP2000P2 >
20 TOOTH 16-PITCH SPUR GEAR-BRWNSS16F20X5/8 >
Browning® 1880004 Single Strand Finished Bore Type 1 Roller Chain Sprocket With Hardened Teeth and Keyway, 1-1/4 in Dia Bore, 3.78 in OD, #40 Chain, 22 Teeth, 1/2 in Pitch, Steel
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
5/16"-MALE ORB X 1/4"-MALE NPTF HYDRAULIC ADAPTER - DAY640154 >
